Loading...
X

Error “Failed to talk to init daemon” (SOLVED)

You can use command line to shutdown Linux computer, following command will shutdown computer:

shutdown -h now
systemctl halt

To reboot, you can use the following command:

systemctl restart

They usually work fine, but on some distributions they require elevated privileges, which means they need to be run with sudo.

But in single user mode, these commands result in the following error:

System has not been booted with systemd as init system (PID 1). Can’t operate.
Failed to connect to bus: Host is down
Failed to talk to init daemon.

Linux single user mode is used, for example, to reset a forgotten password for the root user or any other user. The operation of the computer in this mode is different from normal and, as you can see from the error message, the system was not booted with systemd as the init of the system, so it cannot connect to the bus and cannot send commands to the init daemon.

Related: How to reset a forgotten login password in Linux

However, there is still a way to turn off the computer.

To log out safely, type:

sync
umount /

These commands instruct the OS to write the changes made to the file system (for optimization purposes, they can be stored in the cache), and then unmount the root file system.

After that, to turn off the computer, run:

poweroff -f

Or restart your computer with the command:

reboot -f

Even if these commands did not help, then use the double -f options.

To turn off your computer run:

poweroff -f -f

Or restart your computer with the command:

reboot -f -f

The -f option means forced immediate stop, shutdown, or reboot. When specified once, this results in an immediate but clean shutdown by the system manager. If specified twice, it results in an immediate shutdown without contacting the system manager.

When using the -f option with systemctl halt, systemctl poweroff, systemctl reboot, or systemctl kexec, the selected operation is performed without shutting down all units. However, all processes will be forcibly terminated, and all file systems will be unmounted or remounted read-only. Therefore, it is a radical, but relatively safe option to request an immediate restart. If you specify –force twice for these operations (except for kexec), they will be executed immediately, without killing any processes or unmounting any filesystems. Warning: specifying –force twice for any of these operations can result in data loss. Note that if you specify –force twice, the selected operation is performed by systemctl itself and is not associated with the system manager. This means that the command must be executed even if the system manager fails.


Leave Your Observation

Your email address will not be published. Required fields are marked *

Scroll Up